If you’ve ever had to cope with a zipper that was caught, detached, jammed, or even just plain screwed up? We believe they all have at some point. Check out our article on how to fix a zipper in less than 5 minutes! This instruction on how to repair split zippers in less than five min will save you time and money as you discover how simple it is to fix your own zipper!
1. USE PLIERS
Does your zipper appear to operate well but then come undone as soon as you fasten it? So the slider is the issue. These sliders loosen and gape with time, making them less efficient in holding the teeth in place. While you may take your clothing to a tailor to get the zipper replaced entirely, there is a simple, less expensive workaround you can try first.
Grab a pair of pliers while the zipper is still attached to the garment. The top plate is the component of the slider that connects to the puller (on the externally facing side of the garment). The bottom plate is the component of the sliders that faces inwards on the inside of the garment. Pinch the top and bottom plates together with your tweezers to assist return the slider to its previous, tighter form. Check if the distance between the two spots (where the teeth live) is growing less to see if the pliers are working.
2. OBTAIN A SCREWDRIVER
If one or both sides of the zipper come off the track, the zipper does not need to be replaced; the slider only has to be reattached. To achieve this, you must first locate the zip’s “bottom.” When wearing the garment, the bottom of the zip is usually the end closest to the floor. If you’re unsure which side is correct, look again for the end with a rectangular tab of cloth after the zip stops.
The tooth from that end should then be fed into the slider. Use a flathead screw for more leverage while pushing the teeth into position. Once the teeth are within both sides of the slider, move the puller up and down the track to secure it.
3. APPLY TWEEZERS
First, look whether there’s anything trapped in the zip, such as other clothing or stray fibers. Remove these impediments by hand if feasible before replaying the zip.
If the trapped object still won’t budge, try gently pulling the obstruction out of the teeth with a pair of tweezers. Wiggling the pusher up and down while you pull on the slider might also assist release stubborn things.
4. APPLY A PENCIL And WASHING LIQUID
Don’t give up if the zipper still won’t budge. You could need to assist it a little more. Begin by applying a little layer of graphite to the teeth around the lodge; this will function as lubrication to aid in a smooth run. If it doesn’t work, try a small amount of soapy water to help the slider travel up and down the teeth.
5. EXPERIMENT WITH VASELINE
If the pencil and dish soap doesn’t work, or if you’re concerned about staining your clothes, try Vaseline instead. Begin by grabbing a cotton bud and applying a little layer of Vaseline to the exterior of the bud. Then, using the cotton bud, massage the gel into the teeth around the obstruction. The Vaseline is supposed to assist remove any little things that may be caught in the zip.
Zippers with missing teeth can be difficult to repair, therefore we suggest taking your clothing to a tailor to address this issue. Meanwhile, scroll down to see our fast repairs until you can get to the alterations store.
6. APPLY PLIERS
If your zip continues to fall down, it is likely that the teeth have become loosened or worn away. Begin by attentively scrutinizing the zip to see if any of the teeth are merely out of place or out of alignment. If this is the case, use pliers to gently bend the renegade teeth back into place. Alternatively, if everything appears to be in place, go to the following step.
7. EXPERIENCE NAIL POLISH
If you feel your teeth have worn down due to excessive use (it occurs), a tip that may work is to paint the teeth with transparent nail polish. This will efficiently thicken the teeth, restoring the zip to its prior operating condition. If the zip still does not close after your first layer of polish, it may be worth attempting another layer or two.
8. APPLY A PAPER CLIP
If everything else fails & you can’t get the annoying zipper to stay in place, you may need to replace it totally. Until then, a paper clip inserted into this loop on the sliders will suffice. Then, put the opposite side of the safety pin over the hook or clasp that serves as the zipper’s top to keep everything in place.
That concludes our go-to techniques and guides for how to fix a zipper.